Anchors used to tie back gabion baskets	Anchors used to tie back gabion basket at Wollongong, NSW
Heritage Wall at Kensington, NSW. Repairs to 400m of Heritage Wall were made using Platipus Anchors Type S06 and S08	Tie-back of Contiguous piles at Maroubra, NSW

Sea wall at Dee Why Beach Front, Sydney, NSW

This retaining wall was supported, using 55 type B08TC anchors. Anchor materials used provided an estimated 80 years life span for the anchoring system.

Note the amount of seawater at the installation site. As much of the seawater as possible was pumped away. However, the Platipus installation system was still viable in these conditions. This also demonstrates the great holding capacity that Platipus anchors have in sand.

Repairs to “leaning” brick wall. Note the manner in which the driver is installing the anchors for this project.	Repairs to “leaning” brick wall.
Repairs to “leaning” brick wall. Loadlocking the anchors.	Block walls tie back using anchors
Block walls tie back using anchors	Construction of retaining wall at Chapel Lane, Baulkham Hills, NSW
Weathered Shale encountered at the Chapel Lane, Baulkham Hills site (see picture above). Note that the anchor system could still be installed through this material.

BACK TO PROJECTS UNDERTAKEN IN AUSTRALIA